Contents. Introduction This is a page for Supported USB, or USB-Serial, interface devices. USB, and USB-Serial, devices need to be recognized by Vera's platform before they can be used to interface with the target device (through a Luup Module). There are many USB-Serial devices out there, and not all will work out of the gate. This page is intended to capture the list of known USB Devices that have been tried with Vera, along with their current status, and any information required to get them working. This is a wiki, so feel free to add to the page. Disclaimer IMPORTANT!

• Asynchronous Serial Interface

1. RTI Z-Wave Interface Plugin for Vera Controller s. The Omni Z-Wave Interface – Serial Kit includes: 1 x Vera 3. You will see the Omni Z Wave Plugin logo and.
2. This is a page for Supported USB, or USB-Serial, interface devices. USB, and USB-Serial, devices need to be recognized by Vera's platform before they.

The devices listed here have been added by installers, technicians and users like yourself. Results may vary upon installations. MiCasaVerde does not guarantee operation and compatibility with your installation.

The listed devices were found to work with their specific installation. Mixing different series and brands of equipment is not guaranteed in any way to work with other series and brands. It is very likely that users have not fully tested all features of the devices, so it is possible that a device listed here as compatible, will not prove compatible with your hardware. If you are editing this wiki DO NOT REMOVE a listed working device if it hasn't worked for you. Seek help to get the device to work under your individual circumstance.

Vera Controller. Created by hek. Unplug the MySensors gateway from the Vera USB port. Re-configure serial port as described above (typically.

If you are adding to this wiki, please provide links to data for the device and add any tips you feel may benefit someone wanting to implement the device into an installation. USB Devices Manufacturer Model # Status Date Purchased Chipset Specs Purchased from Added by User Notes USB-UIRT USB-UIRT Working (1.0.918) APC Back-UPS ES 750 Not Working APC HID Doesn't work in Vera 1.0.900. Requires installation of Kernel/OpenWRT modules to support USB-HID Interface for UPS.

This one is listed in guessed's posting USB-Serial Devices Manufacturer Model # Status Date Purchased #RS-232 Ports Chipset Specs Purchased from Added by User Notes Future Electronics UC232R-10 Working 1 FTDI This one is listed in MiCasaVerde's posting SerialGear 8XDB9-USB Not working 8 FTDI - FT8U232AM This one is listed in nanckekr's posting Uses some sort of 'dual' FTDI Chipset that causes Vera to lockup. The OS is correctly recognizing the Chip, and all 8x Serial ports, but Vera's 'Serial Port Config' isn't working correctly against it as it's using a naming strategy that creates duplicate names. Cables Unlimited USB2-VE487 Working 1 FTDI FT232BM Plugged in and works perfectly. Only $10 on Amazon Bytecc BT-DB925 Manual 1 Prolific - PL-2303 This one is listed in guessed's posting. It requires a series of manual configuration steps, and OS-Level access to Vera, to get it working. BAFO DX SKU 5947 Manual 1 Prolific - PL-2303 N/A Well built, recognized by OpenWrt, Ubuntu, Windows, etc. On Vera it will require manual edits made through SSH.

See details on nanckekr's post: N/A DX SKU 22407 Not working 1 Prolific - PL-2303 N/A Intermittent USB recognition errors on Vera; but does work on Kamikaze SYBA N/A Not working 1 Prolific - PL-2303 N/A USB recognition errors on Linux distros and OpenWRT SerialStuff. USBG-4FTDI.

Working 11/2006 4 FTDI FT232BL.? 4 serial ports. Just plugged it in and it worked. There's also a 2-port model from the same place- that MIGHT work also. I assume it's FTDI becasue vera names the ports 'ftdisio'. Fires right up from vera1's u sb port- but in case power is an issue it has a 5v input on the back so you can make it self powered.

It's pretty generic- no name- etc. But feels solid- metal case and never had a problem with it over the years on a pc. NOTE:.=I think it's the same as this page where I found that info Ethernet-Serial Devices Manufacturer Model # Status Date Purchased #RS-232 Ports Chipset Specs Purchased from Added by User Notes WizNet WIZ110SR Working Jan 2010 1 WIZnet This is a stripped down Ethernet-enabled Serial/RS-232 Port.

It's useful in situations where you might otherwise need a GC-100 to get 'just a serial port' to connect to a TV, Amplifier etc. Don't forget to get yourself a 5V Power supply to drive it, or alternatively use a USB-5V Power code (as I do). Initial configuration of the device requires a Windows machine to run the configuration tool (DHCP, Baud Rate/Parity etc). Note that getting this 'connected' to Vera is a manual process at this time.

I use to power mine from an existing USB Power source (a USB Port on my DirecTV unit). Discussions. Forum Posting -.

Forum Posting -. Forum Posting.

. Visonic produces the Powermax alarm panel series (PowerMax, PowerMax+, PowerMaxExpress, PowerMaxPro and PowerMaxComplete). This plugin allows you to control the alarm panel via Vera (arm/disarm) and allows you to use the PowerMax sensors (movement, door contact.) within Vera. For example, you can use PowerMax sensors in Vera scenes. The PowerMax provides support for a serial interface that can be connected to Vera. The serial interface is not installed by default but can be ordered from any PowerMax vendor for about £30 (called the Visonic RS-232 Adaptor Kit).

Asynchronous Serial Interface

Visonic does not provide a specification of the RS232 protocol and, thus, the plugin uses the available protocol specification given at the. Attachments. ( 7.9 KB) - added by nlrb ago. Splash. ( 40.0 KB) - added by nlrb ago.

Because the United States historically has a laissez- faire attitude toward land use, the land has been exploited at will for economic gain. Only in recent decades. Land Use Dynamics and Drivers of Change: Analysis of patterns and opportunities for REDD+ Outline 1. Forest definition, land use change and REDD+ eligibility 2. Land use ~ series of land cover types as basis for OpCost analysis: legend 3. Land cover observation land use interpretation 4. Accuracy in relation to scale and use 5. Melanie Kolb. Land Use, Land-Use Change. Change the way land is used. Some of the more important issues associated with their definition are discussed below and. Driving forces of land-use change Zondag and Borsboom 1 DRIVING. Within the LUMOS research project, an overview of the drivers of land-use change, per.

Panel settings - needs serial config. ( 39.0 KB) - added by nlrb ago. Default panel settings. ( 10.1 KB) - added by nlrb ago. Device: dimmer. ( 7.5 KB) - added by nlrb ago. Device: panel.

( 8.9 KB) - added by nlrb ago. Device: siren. ( 16.2 KB) - added by nlrb ago.

Device: sensors. ( 9.2 KB) - added by nlrb ago. Device: switch. ( 10.2 KB) - added by nlrb ago. Device: partition. ( 30.1 KB) - added by nlrb ago. Panel notification: alarm type.

( 33.7 KB) - added by nlrb ago. Partition notification: armed state. ( 30.1 KB) - added by nlrb ago. Panel: control.

( 24.6 KB) - added by nlrb ago. Partition: control. ( 28.4 KB) - added by nlrb ago.

Panel: devices (auto). ( 26.0 KB) - added by nlrb ago. Panel: devices (edit).

( 36.5 KB) - added by nlrb ago. Panel: zones (auto).

( 36.3 KB) - added by nlrb ago. Panel: zones (edit). ( 4.9 KB) - added by nlrb ago. Powermax notification: reading panel settings.

( 4.8 KB) - added by nlrb ago. Powermax notification: ready for use. ( 5.9 KB) - added by nlrb ago. Powermax notification: no serial connection.

( 45.8 KB) - added by nlrb ago. Panel: event log. ( 8.9 KB) - added by nlrb ago. Device: gas sensor.